How to Understand the Pros and Cons of a teak Shower Floor

Table of Contents

Teak Shower Floor: Transform Your Bathroom Into An Exotic Space

Teak shower flooring is a floor made of tropical hardwood that can’t grow in all climates and therefore is highly sought-after. It’s among the strongest woods and offers a variety of advantages since it’s resistant to insects, water, and decay.

However, this is only the beginning of the Iceberg when it pertains to the advantages of teak. The wood is used to make flooring and furniture.

What Is A Teak Shower Floor?

The Teak Shower Floor isn’t a floor made of teak. Instead, it’s an insert made from teak. The insert is constructed into slats which are rolled out as bamboo mats. It is also customizable to become the shape of a tray. It depends on what shape you want, the dimensions of the shower, and the length of time you would like the teak flooring to be.

Pros And Cons Of A Teak Shower Floor

Naturally, teak is an excellent resource with a list of cons and pros. However, regarding shower flooring, the list of cons and pros is even greater. Take a look at these arguments to purchase and avoid teak shower flooring.

Pros:

Beautiful This one is clear. Teak is a beautiful wood, particularly if properly taken care of. Make sure it is cleaned and oiled, and you’ll get the most gorgeous shower floor you have ever seen.

Durable It’s no surprise that teak has been rated among the most sturdy woods. It’s easier to chip or scratch than other woods. It’s a good wood that lasts for an extremely long time.

Water-Resistant Shower floors made of teak are extremely water-resistant for wood. Most woods will rot within weeks, but teak never grows or expands when exposed to water. But it is important to ensure that it is well-protected.

Pest-Resistant teak is quite insect-proof since it’s water-resistant. It doesn’t hold water like other woods, which means that cockroaches, termites, and other insects don’t attract it. In addition, it’s difficult for them to get into.

Rustic and Historical Finally, teak is an excellent wood with its own story. The knowledge about teak will cause you to want it more since it’s so stunning. It’s an element of Asian culture that has a rustic appeal.

Cons:

Not impermeable Although it’s water-resistant but teak isn’t completely waterproof. It can be flooded; however it will not stay nor expand. There is a decrease in the amount of water that passes through. However, it’s not immune.

Complex Maintenance requires much time and effort to maintain the teak in good form. It is essential to clean and oil it often. If you’re unable to take care of this, it will be durable, but it will not look as attractive.

Don’t Use Bathroom Cleaners since it requires to be kept clean, and using any bathroom cleansers on teak is not recommended. Buying the right cleaner for teak is much safer and more effective. If you don’t, you could lose your money.

Gaps in shower floors could be better. If you’re not the type who takes your shower, insert out, and in each day, then the teak floor might not be the best choice for your bathroom. Bacteria could develop below the floor and threaten those who use the bathroom.

Pricey Teak is among the most expensive woods available on the market. You can only get it for a bargain, and it is sold in small pieces, too and can deceive people into thinking that you’re receiving a great deal.

Polishing Teak

Wood made of teak requires special attention. It is, therefore, essential to keep it polished frequently. It will require a special polish designed specifically for teak wood. It’s quite easy to do but must be handled carefully to avoid harming the wood teak.

Step 1: Cleaning

Before polishing the wood, washing it using a gallon of water and a small amount of dish soap is best. Then, gently scrub the surface. Then wash it off by using the shower. After that, let the wood air dry before proceeding with the next step.

Step 2: Applying Oil

Start by following the directions on the teak oil polisher. It usually involves gently rubbing the wood with teak oil like you would polish a shoe made from leather. It is also common to allow it to set for about an hour.

Step 3: Polishing

In the end, make tiny circular motions to smooth the dried oil. Polish until you see an appearance. The shine will not just be attractive for months but will also safeguard the wood. Teak is naturally rich in oil, so it thrives on teak oil.

How To Install A Teak Shower Floor

If you’re looking to design an individual teak shower flooring and shower, you can do it! Teak can be purchased at most hardware stores if they don’t stock it; however, many of them offer pre-made slats that are the kind you’re looking for.

Step 1: Measuring

This vital step must be repeated. Measure the shower floor and record it somewhere. Next, measure it again and determine if it’s the same. Take this note while cutting the boards. You can draw the diagram if you want to.

Making a diagram is an excellent idea for building. Ensuring that you have everything neat can lead to many fewer errors when it comes to construction. Therefore, take your time to organize and get it done.

Step 2: Planning

The slats should be approximately 1 inch from each other. They should also have 1/2 inch to each end. The enclosure must be 1 inch smaller than the shower floor. In terms of spacing, consider this.

Place your boards on cardboard or a measuring tape on the floor of your shower. Make sure you mark them with a one-half-inch space between them. So, you don’t need to consider whether your calculations are accurate. You’ll be able to see what you must do.

Step 3: Cutting

It’s time to cut. Cut the slats of 1-2 inches that run the width of the shower. Then, spread them out so that they are all positioned correctly. Then, you can create three or two bracing boards to support the back. Place the slats onto them and mark them.

Step 4: Screwing Them In

Then, screw the slats onto the bracing boards to secure them. You now have an insert. Utilize the insert by placing it inside the bathroom whenever you’d like to use it. However, it’s best to always keep it out of the shower.

It is best to clean it every week. Examine for any evidence of mold and determine the need for polishing. It is the ideal moment to polish it. Every week, you can ensure that your shower’s teak floor lasts for years if you do it correctly.

Other Wood Shower Floor Options

Although teak is the most popular choice, however, there are a handful of other shower floor alternatives that work equally. They are also resistant to water and are durable, which makes them great alternatives to tile.

Cedar

Like teak, cedar can be an extremely durable and water-resistant wood commonly utilized in bathrooms. It thrives in cold conditions with lots of moisture and snow and is used in harsh climates.

The natural cedar resins make it more durable and rot-resistant than other kinds of wood. Therefore, it is a great wood shower flooring that smells wonderful and is a must to say.

White Oak

White oak is a stunning hardwood that is nearly indestructible to the elements. This is because it is a hardwood that has extremely close pores. It is more sturdy than spongy, like softwood, with larger pores.

Hinoki

Hinoki is not only water-resistant Japanese wood used for flooring, but it is also believed to possess cleansing or healing properties. This makes it a great choice for a shower floor made of wood and bathrooms generally. It is commonly employed in saunas as well as other similar projects.

Choosing Your Shower Floor

If you are a fan of teak shower flooring but would like to play it safe, then you can make shower flooring, shower surrounds, or even small furniture for your bathroom.

Frequently Asked Questions (FAQ)FAQ

Do Teak Shower Floors Get Moldy?

The floors are resistant to water for wood. Most woods can mold within months, but teak seldom molds or expands when exposed to water. However, you must ensure that you ensure that it is well-protected.

Can You Clean the Teak With Vinegar?

Using an absorbent cloth, evenly cleanse the surface with a teak cleaning solution or a homemade mixture of hot water and vinegar. Allow the solution of vinegar to sit in the teak for around 15 minutes before cleaning the surface with the sponge to match the grain of the timber.

Is Teak Good In A Walk In Shower?

Teak is a great option for shower benches due to its moisture resistance. Teak mats for showers are a great option as the wood has a high amount of rubber-like resins, making them slip-resistant. They are also resistant to bacteria or mold, a major advantage.

How Do You Get Mold Out Of Teak?

Mix a solution that contains oxygen bleach. One cup of bleached powder for one-gallon hot water can rid the dirt, algae, mildew, and mold. It will also remove most of the wood staining or sealers on the teak. Stir the powder into the water until it’s fully dissolving.

Is Teak Wood Waterproof?

Teak is different from other woods. It is not just a durable, strong hardwood, but it also makes its own oil and has a large wax content. It is the perfect outdoor furniture material since the teak oil renders it waterproof and resistant to wood-eating insects.

Teak Shower Floor Conclusion

Teak wood is great for shower flooring. If you’re searching for an upgrade to your bathroom, teakwood would be the ideal choice. Shower floors are versatile and will give your bathroom an exotic beach-like feel.